| MidClampSet1 |
|
Specially designed for DIY solar panel mounting.
For mounting 1 1/2 - 2" frame depth solar panels to the unistrut channel.
PRODUCT OVERVIEW
- For use in mounting solar panels to Unistrut or Superstrut. These are used between the panels.
- For panels having a frame height of 1 1/2 to 2". May work on thicker panels, but this has not been tested.
- Mid Clamps, are securely tightened to the unistrut using 1/4" SS steel bolts. Will not slide or loosen.
- Heavy duty 1/4" thick x 1-3/8" Square top washers, with our custom made 1/4" thick unistrut washers.
- Super easy to install using electric driver and 7/16" socket, bottom lock washer will not turn in the unistrut.
|
|
This item consists of |
| 4) Unistrut/Superstruct compatible lock nuts, made of 1/4" thick 6061 aluminum. |
| 4) Solar Mid Panel square washers, made of 1/4" thick, 1-3/8" square - 6061 aluminum. Super strong |
| 4) Stainless steel 1/4" x 3" hex bolts. |
| 4) Stainless steel 1/4" hex nuts. |
| 4) Stainless steel 1/4" washers. |
Please note. Any unistrut channel, inverters, tools and/or solar panels shown in the photo(s) are not included, only the items specifically designated above.
- Precision cut on our Waterjet cutter in Coleman Texas, U.S.A
Perfect for DIY Solar racking!! |
| More Info. |
|
|
|
|
|
|
|
We verify orders.
|
|
In addition to standard credit card verification procedures which insure the credit card is not stolen, we also verify the computer IP address, phone numbers, etc., to ensure the person placing the order is not doing so for fraudulent purposes. We work with all applicable agencies to prevent and/or report fraudulent or suspicious activity.
|
|
|
